- Filmer Bodies Part One: The Pattern & Materials
- Filmer Bodies Part Two: The Busk
- Filmer Bodies Part Three: The Stomacher
- Filmer Bodies Part Four: Constructing & Finishing
- Filmer Bodies Part Five: Finished Product & Afterthoughts
After many months of hand sewing and many pricked fingertips I present my reconstruction of the Filmer Bodies c. 1630-50 from Manchester Galleries.
Some closeups:
Afterthoughts:
As I was working completely from pictures, a few measurements and curatorial notes when reconstructing these bodies it was only after completing them that I realised that there were a couple of things I got wrong.
The first is that I did not do the boning channels 100% accurately. Although my boning channels run vertically to the centre front of the bodies, after reanalysing pictures of the bodies I can see that the boning is slightly slanted away from the centre-front at the top, like the effigy bodies. This would have been to allow for the bust and could slightly change the way that my reconstruction fits around the bust area, making it less accommodating of larger busts.
Secondly, I also realise that I did not cut the slits between the back tabs high enough. In my original pattern I actually had them much higher, as they should be, however, I wasn’t sure if it was going to be too high so I lowered the slits a bit. Turns out I had it right to begin with! Again this means that the fit of the bodies might be slightly altered, as it makes the waistline lower.
One thing I cannot work out are the shoulder straps. These straps are designed to sit off the shoulder in accordance with mid-seventeenth century fashions. However, the straps on my reconstruciton are very short, even though I checked my measurements and calculations multiple times before I cut out my fabric. Either the original owner had very narrow shoulders or there is meant to be a length of ribbon holding them together. Then again, my blow up mannequin off eBay doesn’t have the best proportions so once I try these on a model hopefully I can work this out more.
Overall though I’m extremely happy with how the bodies turned out and I can’t wait for my models to try them on!